TDOOR_TSTC AUTOMATIC DOORS

  Sliding Door Operator   is one of the best selling products of TSTC, there are several best selling models will be introduced as below . ▪  TS600  is the smartest model of TSTC sliding door operator, with the smaller dimension only W145 x H120mm ( The height of the supporting rail is 80mm ), it’s also a modern sliding door Operator which could be monitored by the camera and controlled by Mobile App at the same time. What's more, the key spare parts of TS600 like motor, control unit could be substitute perfectly for DORMA sliding door operator, especially the model ES200. ▪  TS300  is the most classical model of TSTC sliding door operator, hot sale in automatic door market for over 10 years, they had already installed in plenty of airports, chain supermarkets, hotels, shopping malls, bus stations and other types of projects in more than 20 countries .This model possess almost the same features as KBB KS3000, all  the spare parts could be replaced perf...

  We TSTC possess the professional & complete after sale service procedure for our automatic sliding doors.  After the installation of   sliding door operator   like TS300, the after-sales service process will also immediately initiated to ensure our doors could be operated normally. Our after-sales service includes the regular checking, regular cleaning, regular lubrication for the sliding door , also includes the spare parts repair and replacement . ▪  Regular Checking  . To check if the motor, control panel could be operated normally, to check if the belt, durable rail is worn severely, to check if the sensor/radar is sensing sensitive ? ▪  Regular Cleaning  . Clean the door surfaces, sensors and sliding rail, regularly to remove dirt, dust, and debris that may affect normal performance. ▪  Regular Lubrication .  Apply lubricant to the frequently operated components, like motor, gearbox, carriage wheels, tension wheel, to reduce f...

  The automatic revolving doors are well installed in the modern buildings like the hotels, shopping malls, airports, public buildings etc., it's much common for us to see the revolving doors in the buildings listed above . As a combination of mechanical parts and electrical parts, it is not surprising that some problems appeared, that's what we will talk about here, the maintenance for the automatic revolving door . Importance of Maintenance for Automatic Revolving Door ▪ Comply with Regulations.  Automatic revolving door  must comply with accessibility and safety regulations locally and preventative maintenance ensures our doors could meet these standards, avoiding potential fines or legal issues.  ▪ Ensure Safety. Automatic revolving doors' malfunctions may bring safety risks to the users, may cause injury to the users, and regular inspections and maintenance could help us to identify and rectify potential dangers. ▪ Enhance Performance. Periodic maintenance could...

The ordinary 3/4 wing revolving door is the revolving door with the highest market share, it is also the revolving door with the most mature technology, the most reliable quality and the lowest failure rate after decades of market testing. Furthermore, the price is more advantageous than that of the all-glass revolving door and 2 wing revolving door, making it widely accepted by   hotels ,   shopping malls ,   office buildings , and even   airports   and   hospitals ....The ordinary 3/4 wing revolving door with the model TAR300 is also the best selling revolving door from TSTC.  Why Choose TSTC 3/4 wing Automatic Revolving Door ? ▪  Reliable design for Door Structure and Smart Control . ▪  Reliable core parts from world famous brands like SIEMENS, LENZE, BEA . ▪    Safety Features with enough safety Sensors, safety Buttons, Force-sensitive and Torque Control, Panic Breakout System could be provided if need . ▪    Distribut...

With the safe&clear glass, the slim aluminum as well as the underground driving mode, TSTC All Glass Revolving Door with the model TAR600 could provide our partners perfectly with a gorgeous entrance area to the modern buildings, especially for the ones with stunning glass facade like office buildings , shopping malls , airports etc.. Advanced and Mature Technology. ▪   All glass design, Reliable design for Door Structure and Smart Control , special  Underground driving mode . ▪  Reliable core parts from world famous brands like SIEMENS, LENZE, BEA . ▪   Safety Features with enough safety Sensors, Force-sensitive and Torque Control, Panic Breakout System could be provided if need . ▪  Safety Glass with 12mm, 16mm thickness, excellent shock resistance, anti-explosion performance. ▪  Slim aluminum profiles with thickness 30mm for outer wall and 23mm for door wing, make the whole door look more transparent . ▪   Distributors and instal...

  How   2 Wing Automatic Door   Works ? The brief introduction below will be helpful to you to understand .  1st  . When the detective radars in the canopy of the 2 wing revolving door detects the infrared source like pedestrian, the signal will be sent to the PLC /main control unit of the door.  2nd  . The MCU /PLC process the signal from the radar, and sent the signal out from the corresponding ports, then the operation signal will be sent to the frequency converter and controls the output of alternating driving motor, and make the door revolve accordingly . 3rd  . When it's on sliding door mode, the revolving door will stop at the opening position and will not revolve even the radars were triggered. Based on this, when the sliding door radar detects the infrared source like pedestrian, it will send the signal to the MCU of the sliding door, and MCU send the instruction to the driving board which connected to the motor of the sliding door, final...

  In today's society, the building become higher and higher, the entrance area become bigger and bigger, at the same time, the demand for higher and wider doors is increasing, however, the limit for door closer /floor spring restrict the weight and size of the door, the max support for the door body is only about 250Kg with the normal floor spring, as a result, it's impossible to offer larger entrance design with   manual swing door . On the other hand, we can adopt the heavy-duty floor spring, however, the users need push hardly to open the door, which causes inconvenience either. The balanced door which launched by TSTC improved this unfavorable situation, bring the convenience to all kinds of people. With the help of the center hanger, our  balanced door  could hold the door leaf with 1,600kg , 12m height at most .What's more , the close speed & open strength of the door are adjustable . The other feature of our balanced door is the small opening force . As we...

  How   3/4 Wing Automatic Revolving Door   Works ? The brief introduction below will be helpful to you to understand.  1st. when acquisition sensor/detective radar in the canopy of the revolving door detects the infrared source like pedestrian, the signal will be sent to the PLC /main control unit of the door.  2nd. The MCU /PLC process the signal from the radar, and send the signal out from the corresponding ports, then the operation signal will be sent to the frequency converter and controls the output of alternating driving motor, and make the door revolve accordingly . 3rd. At the same time, the safety transducer, safety switch, emergency stopping button and other safety devices will monitor the signal, and send the signal to the PLC designated ports, if any of them be triggered,  PLC will send the braking signal to the frequency converter to make the motor stop immediately . 4th. After the person pass through the  revolving door , the d...

  We know that automatic doors are a combination of mechanical and electrical components. Mechanical parts such as hardware will experience wear and deformation after long-term use, while electronic components will also approach the end of their service life due to prolonged operation. In short, automatic doors require proper maintenance after a certain period of operation, similar to how cars need regular servicing after a certain time of use. So, what parts of an automatic door usually need maintenance and replacement? The following content may be helpful to us. 1. Automatic Revolving Door The Key  spare parts of TSTC automatic revolving door  include motor, gearbox, tooth belt, control unit ( PLC, Invertor), safety rubber, key switch, encoder, mechanical lock, bearing, emergency stop button, handicap button, sensors etc.. Besides to maintain our own revolving doors, our parts above could also be perfectly substitute for the parts of revolving doors from the popular bra...

  Chinese revolving door market is a big market compared with other areas, though it developed a little slower in the past few years, it still maintains a large market size. What about it in the year 2024? The part below maybe provide a brief answer . 1. Major Brands and Market Share Chinese  revolving door  market features intense competition between domestic and international brands including ASSA ABLOY (Record), Dormakaba, Boon Edam, GEZE etc., dominate the high-end market with a combined share of 40%, others including Chinese brands hold the remained shares in the mid-end and low-end market. The industry is highly concentrated, with the top five brands (including foreign players) accounting for over 60% of the market. 2. Main Door Types and Sales Revolving doors can be categorized by structure: • 3/4 wing Revolving Doors. Hold 60% market share (2024), mainly used in high-end commercial buildings, with 6.2% annual growth. • 2 wing Automatic Revolving Doors. M...